Difference between revisions of "UltraVNC"

Revision as of 21:03, 5 September 2008

This is a silent installer and uninstaller for distrubution of UltraVNC.

Package for UltraVNC 1.0.2

<package
    id="ultravnc"
    name="Ultravnc 1.0.2"
    revision="1"
    reboot="false"
    priority="2">
 <check type="uninstall" condition="exists" path="UltraVNC v1.0.2" />
 <install cmd='%SOFTWARE%\UltraVNC-102-Setup.exe /verysilent /norestart /SP-' />
 <install cmd='%ProgramFiles%\UltraVNC\winvnc.exe -sinstall' />
 <install cmd='%ProgramFiles%\UltraVNC\winvnc.exe -servicehelper' />
 <upgrade cmd='%SOFTWARE%\UltraVNC-102-Setup.exe /verysilent /norestart /SP-' />
 <remove cmd='%ProgramFiles%\UltraVNC\winvnc.exe -remove' />
 <remove cmd='%ProgramFiles%\UltraVNC\unins000.exe /SILENT' />
</package>

Note that you can save changes to the defaults by saving an inf file during setup (by using the /saveinf=filename.inf switch), then retrieve them during deployment (using the /loadinf=filename.inf switch).

There is a problem with installation of UltraVNC Mirror Driver on some computers - installation freezes.

Package for UltraVNC 1.0.5

TODO

UltraVNC 1.0.5 is very different to UltraVNC 1.0.2.

UltraVNC 1.0.2 Mirror Driver

The mirror driver is included in the regular installer. It does not need to be installed separately.

Notes

• if you want to test the silent installation and you log in over RDP, installation will hand during the installation of the Mirror driver
• settings in /loadinf seems to be ignored during silent installation - you can't exclude the Mirror Driver this way

Alternative installation

I couldn't install it with the UltraVNC installer on some machines - it was hanging all the time.

Here's a batch script which:

• copies UltraVNC directory to %PROGRAMFILES% (available in UltraVNC-102-Bin.zip)
• removes the service - if you had any other VNC servers installed in the past, this step might be helpful to avoid potential conflicts
• adds the service
• adds registry entries - after configuring the server (password, access etc., copy \\HKEY_LOCAL_MACHINE\SOFTWARE\ORL\WinVNC3\)
• starts the service
• uses "echo" to exit with code 0

%SOFTWARE%\robocopy %SOFTWARE%\UltraVNC\UltraVNC C:\Programme\UltraVNC /MIR /W:3 /R:3 >nul
C:\Programme\UltraVNC\winvnc.exe -remove
C:\Programme\UltraVNC\winvnc.exe -sinstall
regedit /s %SOFTWARE%\UltraVNC\VNCHooks_Settings.reg
regedit /s %SOFTWARE%\UltraVNC\ultravnc.reg
net start WinVNC
echo

Windows Firewall

When installing silently the Windows Firewall won't prompt you to allow the VNC Server. You can script allowing traffic to the VNC server (on TCP port 5900, from all sources) using:

netsh firewall add portopening TCP 5900 "VNC server" enable all